Shield RMSc footprint standard

February 18, 2025

Which red dots will you be able to mount on the ,mount with RMSc or Shield RMSc footprint? Will you be able to install Sig Sauer Romeo Zero on the same plate as Shield RMSc? We cover the full compatibility of Shield RMSc footprint in this article.

Footprint compatibility explained

What does a "footprint" mean? The term footprint refers to a sctructure of the sockets and screw holes on the base of the optic device.

And what does it mean if the footprints are compatible?

Each optic sight has some base for mounting. The base consists of pins on various positions and holes for screws used for fixation of the sight to the mounts. If any two sights use the same base for mounting, we call that that they share the same footprint.

In this article we show which red dot sights share the same footprint.

Shield RMSc footprint pattern

Shield RMSc footprint consists of four sockets in the corners of the sight and of two screw holes in the rear of the sight.

The front as well as the rear socketes are 17mm / 0.66 inches far from each other. From the rear sockets to the front sockets the distance is 32,8mm / 1.29 inches. Position of these four sockets corresponds to position of pins that are on a mounting surface of any mount for this standard.

The screw holes are positioned in the rear part of the optic device. These function for fixation of the sight to the mounts. These two screw holes are 14mm / 0.55 inches far from each other.

The screws that are to be used for these screw holes are always included in the package with the sight.

Compatible red dots

The RMSc footprint is shared by many other manufacturers on the market.

Below you can find complete list of red dot sights that will work with Shield RMSc footprint.

Shield RMSc standard

ADE Advanced Optics RD3-018 Spike,
ADE Advanced Optics RD3-021 Nuwa,
JPoint MRD,
Shield AMS,
Shield AMSc,
Shield OMSsc,
Shield SMS,
Shield SMS2,
Shield SMSc,
Shield RMS,
Shield RMS2,
Shield RMSc,
Shield RMSsc,
Shield RMSd,
Shield RMSw,
Shield RMSx,
Sig Sauer Romeo Zero,
Sightmark Mini Shot A-Spec M3,
Swampfox Sentinel 1×16,
UTG OP3 Mini Micro,
Vector Optics Frenzy-S 1x16x22,
Vector Optics Frenzy-S 1x17x24 MIC,
Vector Optics Frenzy-S 1x17x24 SID,
Vector Optics Frenzy-S 1x17x24 MOS Multi Reticle,
Vortex Defender CCW

Vector Optics Frenzy-S 1x17x24 MOS Multi Reticle red dot

(1)

€189,00 EUR

Low stock (9 units)

View details
Vortex Defender CCW

(1)

€320,00 EUR

Low stock (19 units)

View details
Sold out

Vector Optics Frenzy-S 1x17x24 SAS

€159,00 EUR

View details
Vector Optics Frenzy-S 1x17x24 MIC

(1)

€139,00 EUR

Very low stock (6 units)

View details
Vector Optics Frenzy-S 1x17x24 MIC [green]

€199,00 EUR

Very low stock (1 unit)

View details
Shield RMSx [Glass]

€516,00 EUR

In stock

View details
Sold out

Shield AMSc

€612,00 EUR

View details
Sold out

Shield AMS

€648,00 EUR

View details

How to mount red dot with Shield RMSc footprint

It depends on what device you want to mount it.

Will you install it on a a picatinny mount? I.e. gun equipped with picatinny rail? Then you need to look for picatinny mount with Shield RMSc footprint.
Or will you mount it on a pistol? And will the pistol be optics ready (with pistol slide cut for red dot). Then you need to look for red dot mount with Shield RMSc footprint.
Or will it be standard pistol without such cut? Then you need to look for optic plate with Shield RMSc footprint.

Other footprint standards

There are many different bases for red dot sights, but the other most common are following:

Fast delivery

Everything was fast, greetings from BiH, thank you so much for the ICM plate

Fast, reliable and efficient

Thank you to the entire team for their professionalism and responsiveness in after-sales service. I recommend for all CZ spare parts.

Wow -really fast service and communication

Emailed them about a part, quick response, shipped immediately after order. Fanstastic

Compatible avec CZ chadow 2 compact

Reçu le colis envoie sécurisé plaque Trijicon RMR CZ-SH2 unc 6-32
Point rouge Frenzy 1×22×26 MOS Multi-rectil le tout compatible avec CZ Chadow 2 Compact monté mais pas encore testé jusqu'à maintenant je recommande cite sérieux

Efficacité

Bonjour, mon expérience chez Optics Spot est très satisfaisante, produit conforme et reçu en 72h, j'ai du renvoyer l article car non compatible avec ma hausse et y a eu une très bonne communication avec Paul.
Les tarifs sont correcte les FDP aussi. Je recommande cette compagnie.

Everything ok.

Lieferung schnell wie angekündigt. Lieferstatus wurde mitgeteilt. Das Produkt passt wie bestellt. Alles ok, gerne wieder.

EXCELLENT!!!! As the Terminator says; I'll be back!

I ordered adjustable sights for my CZ 75 Shadow, but accidentally ordered the wrong one (without the white dots). I sent a mail on a Sunday, and that was answered the same day, and the order was changed instantly. The right set arrived from the Czech Republic to The Netherlands on Tuesday morning.

Thanks for the Excellent service Paul.

Mire canik mete sft

Pacchetto arrivato dopo 15 giorni circa in perfette condizioni, prodotto eccellente, non mi aspettavo che ci fossero 2 pezzi di fibra ottica (rossa, verde)
Tornerò a fare altri acquisti
Al più presto posterò le mire installate

trés sérieux

Boutique en ligne trés sérieuse, pas de mauvaise surprise, commande honorée et envoyé dans les 24h, suivi par UPS.
L'article est parfit pour mon CZ

Excellent seller, very professional..

Excellent seller, very professional.. Advises you on the product you want.. Whether it is compatible or not.. This is my 2nd Holsun HS407 C X2
On the first one that I bought a few years ago.. I haven't changed the battery yet :-) The plate with sight is very good, not yet tried, I'm delighted.. To test the next training!
Thank you to the seller for his professionalism.. I highly recommend this site and the delivery 5 stars too.. Too bad we can't put more :-)

Super pupper

Vàga kiire tarne Eestisse, usaldusväärne müüja!

kolimator holosun

Bardzo miła obsługa,szybka dostawa.Polecam.

Beretta 92x Optic Plate Type B - AWESOME

Don't buy this from any other site...Optic Spot INCLUDES the pin set that you'll need to mount your optic, even the Beretta site does not include this. Was a PERFECT FIT and high quality!

Let customers speak for us

from 211 reviews

Picatinny red dot mount | Trijicon RMR footprint

Peter Risko

03/09/2025

Recommendation

Easy to install and good quality

Olaf S.

HK USP red dot mount universal | type C

03/08/2025

CZ Shadow 2 Optics Ready plate | Shield RMSc footprint

Fast response and great product

The service and product are very good
I would highly recommend.

samuel Divers

CZ Shadow 2 Optics Ready plate | Shield RMSc footprint

03/07/2025

Glock MOS Plate

Works like intended and my Shield RMSc red dot fit like a glove.

Joshua Kelley

Glock MOS plate | Shield RMSc footprint

03/06/2025

Beretta PX4 red dot mount universal | type A

Solid dovetail mount

Great option if you don't want to mill an optics cut into your PX4 slide. Easy installation and robust construction.

JMK

Beretta PX4 red dot mount universal | type A

Beretta 92X Performance red dot mount universal | type B

Cliff Kobelsky

Vector Optics Frenzy S 1x17x24 Mic CZ P10C

Bought Vector Optics Frenzy-S 1x17x24 MIC with Shield RMSc plate on CZ P10 C -fits awesome.
Good price, good products, very very fast shipment.!
Greatings from Lithuania.

Andrew

Vector Optics Frenzy-S 1x17x24 MIC

03/05/2025